SPI and i2C CH341A USB Mini Programmer Kit

CH341A Black Edition Kit

The hardware kit can be purchase in well-known online shops and the price for the starter kit is very affordable.


Install the CH341A Windows Driver

The drivers can be found in the NeoProgrammer application root directory which folder named Drivers. Inside the drivers folder, there was a folder named CH341A which all the drivers needed to recognize CH341A device by the windows computer. To install the driver, run SETUP.EXE and click install from the setup window. There are documentations can be found in the Doc folder you can explore.

CH341A Drivers inside NeoProgrammer root directory folder



Setup.exe Window

Windows Device Manager when CH341A USB device plugged into the computer

NeoProgrammer Application



Download NeoProgrammer and CH341A drivers: Google Drive | MediaFire

Comments

Post a Comment

Popular posts from this blog

Dell P2214H Dump Firmware Files

Image
Dell P2214H Main Board In this board you can find three 24xx EEPROM I2C and one 25xx Serial Flash SPI. The 25X40CLNIG flash chip contained the main firmware for the RTDxx display controller chip. All these chips powered by a 3.3 volts DC. You may look for datasheets for more information about the chip. Reading and writing the chip memory required to be desoldered from the board to work properly. You may need a hot air SMD station, a soldering flux and a metal tweezer to remove the chip from the board. One of the device used to read and write memory chip was the CH341A USB mini programmer which is cheap and multi functional programmer. Flash and EEPROM Dump Files  Winbond 25X40CLNIG RTDxx SPI FLASH 24C02 HDMI_DVI DDC i2C EEPROM 24C02 VGA DDC i2C EEPROM 24C16 RTDxx i2C EEPROM Download Files:  Google Drive  |  MediaFire Read more about SPI and i2C USB programmer used for reading and writing firmware.
Read more